For a better experience, keep your browser up to date. Check here for the latest versions.

HRI Sensor

Available in these Regions:

Description

High Resolution Interface (HRI) is a universal sensor that is compatible with a wide range of meters, including:

  • Single-jet
  • Multi-jet
  • Piston meters with dry-dial and semi-dry registers in glass-copper or plastic housing

The HRI can be retrofitted on all Sensus meters built since 2008 that are pre-equipped with an HRI modulator.

The HRI is available in two versions:

  1. The HRI-A pulse unit is a high resolution pulser which detects the flow direction.
  2. The HRI-B data unit is an electronic register with a data interface which supports both hard-wired M-Bus systems and battery-driven MiniBus devices such as mobile meter reading systems. The HRI-B can alternatively be used as a pulse type with configurable pulse output.

The HRI is more than an extension of a simple sensor; it has been expanded to provide a reliable data source for reading a conventional meter remotely. It fulfills today’s requirements for data interrogation and remote transmission.

Typical applications include:

  • Load profiles via a fixed network using M-Bus or via radio, telephone or GSM modem
  • Industrial application (e.g., dosing)
  • Remote reading of flow rate and cumulative flow using a frequency converter
  • Leakage detection when connected to a data logger
  • Generation and transmission of flow profiles using a data logger and GSM modem. The design of the HRI allows the  system to be installed in extreme conditions, such as flooded meter pits.

Benefits to you

  • Retrofits to a wide range of existing and compatible meters
  • Detects flow direction
  • Does not influence the meter’s performance
Features & Documents
Find Product Documents

Features

  • Load-free sensor detection of the pointer‘s rotation of pre-equipped meters
  • No influence to the meter performance
  • Can be retrofitted to pre-equipped meters
  • Detects flow direction
  • Suitable for a wide range of meters
  • Electronic non-bouncing contact output
  • Ultra-long battery life
  • Hermetically sealed housing (IP68)
  • Nonmagnetic principle

Specifications

HRI-A (pulse unit)

  • Provides a reliable pulse output and direction signal or cable cut functionality

HRI-B (data unit)

  • Provides a data output with ID and counter reading
  • ID and Counter reading can be synchronized to the mechanical meter
  • Serial output acc. the M-Bus standard
  • Configuration over wire
  • A pulse output can be used
  • Allows external feeding to release internal battery

For more information about this product, please download the data sheet.

Related Sections

Contact Us

Have questions? Our experienced staff can help you find the answers. Click below to contact us or find an office near you.

Contact Us

Please select your preferred language:

English Deutsch Français 日本語 Español 简体中文